Cabinet Construction on Three Lines

Choose the Type of Cabinetry That Suits You Best

We offer 3 lines of Cabinetry:

  • Standard: white melamine interior
  • Select: maple melamine interior
  • Premium: plywood interior

With three lines of cabinetry and all door styles available in each, there is a style to meet any homeowners taste, wants and needs. Wood, Thermofoil and melamine doors are all available in multiple colors and finishes.

Solid wood doors are available in stain, paint and glaze finishes. There are flat and raised center panel options. Thermofoil doors are offered in solid colors, as well as a selection of natural looking woodgrain designs.
They’re offered in several slab doors ranging from beveled and round-over edges to raised panel and shaker style doors. The newest offering of 5-piece textured shaker style doors come in several colors of Italian crafted melamine. The melamine flat panel doors are offered in multiple colors and textures for the most budget-minded.

Cabinet Construction on Three Lines

InteriorsStandard and Select interiors are white and Maple melamine respectively. Matching wood veneer or textured laminate interiors are an available modification. Premier Plywood Construction interiors are clear finished birch veneer.
End PanelsStandard and Select end panels are 5/8″ thick industrial grade particle board. The exterior of the end panels will be maple print unless a finished cabinet end is specified. Premier Plywood Construction: Standard end panels are ¾” thick plywood. The Exterior of the end panel will be unfinished unless a finished cabinet end is specified.
Tops and FloorsStandard and Select tops are 5/8″ industrial grade particle board. Base and vanity cabinet tops are open with 5/8″ thick, 6 – 3/8″ wide stretchers. The exterior of wall and tall cabinet tops will be matching if white maple print on Select unless a finished top is specified.Premier Plywood Construction modification: Standard tops are ¾” plywood. The exterior of the wall and tall cabinet tops will be unfinished unless a finished top is specified. The exterior of the floors will be unfinished.
BacksCabinet backs are 5/8″ thick industrial grade particle board. The exterior of the back will be unfinished. White interior on ‘Standard’ and maple print on ‘Select’. Plywood Construction modification: Cabinet backs are 5/8” plywood. The exterior is unfinished.
Case ConstructionThe cabinet case is assembled and secured with glued dowels and screws. Finished ends are secured with glue and dowels. Base and vanity cabinets with two top drawers will have a vertical center support.
ShelvesShelves are 5/8″ thick industrial grade particle board with maple print and PVC edge. Shelves are adjustable and supported by clips. Cabinets with matching interior will have 5/8″ matching shelves with veneer edge. 1-1/2″ shelf trim can be specified on matching wood shelves. Premier Plywood Construction: Shelves are ¾” thick plywood with a clear finished birch on both sides, supported by pins. Hinges: 120-degree cup hinge for Standard and Select. 6-way adjustment. Premier has soft close hinge feature.
Drawer BoxesMatching interior white or maple 5/8″ melamine on Standard or Select. Drawer Hardware: Side mount epoxy slides. Premier Drawer boxes are 5/8″ finger-joint wood, dovetailed front and back with a 1/4″ birch veneer plywood captured bottom. Drawers have full extension, concealed undermount guides with 6-way adjustment and an integrated soft close feature. Roll Out Drawers: Match interior or upgrade to roll out drawers are 5/8″ finger-joint wood, dovetailed front and back with a 1/4″ birch veneer plywood captured bottom. The front of the drawer is scooped. Roll Out Drawer Hardware: Roll out drawers have full extension, concealed undermount guides with an integrated soft close feature as standard.

Cabinet Case DepthStandard wall and tall cabinet case depths are 12″ and 24″. Standard base cabinet case depth is 24″. Standard vanity cabinet case depth is 21″.
Cabinet Case HeightStandard base cabinet height is 34-1/2″ unless otherwise noted. Vanity cabinets are available in 2 standard heights of 32-1/2″ and 34-1/2″. Wall and tall cabinet heights are as noted.
Toe KickBase, tall and vanity cabinets are standard with a notched toe kick that is 4-1/2″ high and 2-3/4″ deep. Notched toe kicks are unfinished and require toe kick cover. No toe kick or recessed toe kick are available.
Door and Drawer Reveals

  • Wall Cabinets: Top: 1/8″, Bottom: 1/8″, Sides: 1/16″
  • Base and Vanity Cabinets: Top: 1/4″, Bottom: 0″, Sides: 1/16″
  • Tall Cabinets: Top: 1/8″, Bottom: 0″, Sides: 1/16″

Leave a Reply

Your email address will not be published. Required fields are marked *