PVC, ABS, acrylic, melamine, wood or wood veneer Edge Banding

Edge Banding

Edge Banding can be made of different materials (PVC, ABS, acrylic, melamine, wood or wood veneer). It is used in carpentry and furniture-making. Edge banding is used to cover the exposed sides of materials such as plywood, particle board or MDF, giving the appearance of a solid (or more valuable) material. Edge banding can also be used instead of features such as face frames or molding.

Edgebandings typically come with a primer, which acts like a bonding agent between the adhesive and the substrate. Thicker edgebanding requires a slight concavity to provide a tight glue line. The thickness can vary from .018″ to 5mm or even more. Edgebanding can be applied to the substrate by using hot melt adhesives. Hot melt adhesives can be water or solvent based and they can consists of different raw materials (EVA, PUR, PA, APOA, PO). The machine that applies the edgebanding is called edgebander. An edgebander bonds the edgebanding to the substrate, trims leading and trailing edge, trims top and bottom flush, scraps any surplus and buffs the edge

Edge bandingsĀ with 0.55mm, 1.2mm and 1.3mm thickness. And fromĀ 22mm, 29mm and 40mm width.

Leave a Reply

Your email address will not be published. Required fields are marked *