What materials are good for wardrobes?
Choosing composite multi-layer solid wood or moisture-proof board is suitable for the home environment with relatively high requirements for environmental protection, practicability and long service life. Economically acceptable friends can be the best choice.
Hexiang board is made of crop straw as the main raw material, MDI glue and functional additives. It is not only smooth, uniform and symmetrical in structure, solid in surface, but also has the characteristics of good dimensional stability, high strength, environmental protection, flame retardant and weather resistance. It also has excellent processing and surface decoration properties and is suitable for various surface decoration treatments. Compared with particleboard, it has obvious advantages in mechanical processing, especially special-shaped edge processing.
Composite solid wood, moistureproof board, solid wood paint-free board: both moistureproof, environmental protection, and cost-effective. National cabinet products have experienced more than ten years of development, more than ten years of experience is enough to conclude that the wardrobe with moisture-proof board is the second choice! The moistureproof board of cabinet can be used in severe humid environment, which shows its high quality. Because the plate surface is more brittle, the production equipment is more demanding. After decoration and painting, the wall of the new house will have a small amount of water. After the whole wardrobe is installed, it can not be ventilated. The back of the wardrobe needs better moisture-proof board. Moisture-proof board immersed in water, because there are long wood fibers, coupled with green moisture-proof agent, soaking expansion to a certain extent will no longer expand, so most brand cabinets with moisture-proof board as the main material of cabinet body, there is a certain reason.
Particleboard and MDF manufactured by regular manufacturers: Particleboard manufactured by the same material is more ring-like than MDF.
Bao, in fact, the truth is simple: forming wood, no glue, environmental protection is certainly speechless. If the amount of glue used for cutting one piece is different from that for five pieces, the less glue, the more environmentally friendly. Medium fibre board, also known as density board, is formed by pressing wood flour. It has better smoothness and is more suitable for carving and moulding. It is usually used for moulding door panels, such as baking paint and moulding (plastic absorption). In addition, the MDF material is more soft, it is not easy to burst when sealing, and it is easier to process, so many small factories adopt medium size. The moisture-proof performance of particleboard is much worse than that of moistureproof board. There is less green core moisture-proof agent. If the wood is in moist environment for a long time, it is easy to mould and rot. The raw material of MDF is wood flour. When the MDF is soaked in water, it will expand like a cake.
Small factories produce particleboard at low cost: Most small factories consider the cost, generally using particleboard (solid wood particulate board), using ordinary glue, the cost is the lowest of the three materials.
Eco-board: (refers to the eco-board produced by a small workshop) Large core board or sandwich board with double-sided triurethane noodles! Quality aspect: Sandwich board (commonly known as Blockboard and woodworking board) is a plywood with solid wood core. It cuts logs into strips, splices them into cores, and processes the outer veneer. The stress of the whole board comes from thin two layers of outer veneer. The middle of the board is joined by wood blocks, and the base material is basically not stressed, so it is easy to break and deform. This kind of board mostly uses one or two years of Chinese fir as raw material, so long as the finger can be used to cut the wood block, the nail holding force is several times lower than the national standard.